Intradin（Shanghai）Machinery Co Ltd
Add to Cart
500 Watt Automatic Meat Grinder And Sausage Stuffer W / 2 Stainless Steel Cutting Plates
Function:
Grind:Use this setting for normal meat grinder operation.
Stuff: Use this setting for making sausage; it is a slower speed than forward so the operator can stuff sausage correctly.
Reverse: Located on the power switch is the reverse switch, it is marked as "REV". The reverse switch mode is "Spring-Loaded"-it does not lock into place, and will spring back from "REV" to the off position. The reverse switch can be used to unclod any fatty meats, tendons, suet that could be tangled around the auger or in-between the auger and grinder head.
Specifications:
| Item number | MG-204191 | MG-204185 | 52021250 |
| Rate Power | 400W | 500W | 500W |
| Master Pack | 4pcs/ctn | 4pcs/ctn | 1pc/ctn |
| Measure |
19''x17''x17'' 485x435x435mm |
20''x18''x16'' 500x445x410mm |
16''x13''x14'' 410x335x345mm |
Description:
Before Use:
| 1 | Disassemble the grinder head and wash each part thoroughly in warm soapy water |
| 2 | Removing all packing grease and oil from the surfaces |
| 3 | Dry all parts before re-assembly |
| 4 | Keep packing material for future storage of grinder and grinder parts |
After Use:
| 1 | Disassemble all parts and wash thoroughly in soapy water |
| 2 | You must remove all foreign material from all applicance parts |
| 3 | Dry all surfaces |
| 4 | Do not sue bleach or chlorine based chemicals to clean |
| 5 | Discoloration of plastic parts can occur |
| 6 | Wipe down all non stainless steel parts with a food grade spray |
| 7 | Alternatively, wipe down with salad oil to keep from rusting |
| 8 | Do not immerse motor housing in water |
| 9 | Damage to motor can occur |